Test results of
VisTrak SCX and LX
vs
MLM2Pro, ProTee VX, GC3
SCX vs MLM2pro
Test was made using the SCX and the MLMPro running in parallel for the same shot
Test results show almost identical data when using the new GSA Golf CP version 10.1.7.6 or higher
Note that the MLM2pro does not capture club face or path
Some adjustments had tp be made to the SCX's club and ball speeds.
Should further test results show that these adjustments are consistently required for all shots, they will be made defaults
Some adjustments to side spin and spin axis also had to be made.
These will also be made standard later.
SCX vs ProTee VX
The above is a frame image of a test shot video from the VX
The above image shows the SCX data results from the exact same shot after loading the VX shot video into the SCX
For the first test, the complete post shot video will be loaded into the GSA Golf CP
and a data capture procedure will be run on them.
Note:
Due to the fact that the captured VX video is (presumably) only from one of the cameras (either the left or the right)
stereo vision calculations in the GSA Golf CP cannot be made.
Thus, ball VLA and HLA values have to be manually set for this initial video data comparison data test.
Even so, the GSA Golf results should be very similar to the data results in the VX video.
i.e. ball speed, ball back and side spin, spin axis, club speed, club path and club face angle.
Once this has been established, both the SCX and VX will be run together for each shot
to see if there are any major differences in the data capture results
LX2 vs GC3
Test results coming soon
Videos coming soon too
Note :
Additional comparison tests with the likes of the Trackman IO and Uneekor Eye XO
may be coming up as well but - as the ProTee VX is so accurate -
such tests are probably just splitting hairs and superfluous.